YAMAHA POWER MIXER EMX5 - EMX5
Powerful & High Efficiency Class-D Amplifier
The EMX7 and EMX5 models feature a built-in high-efficiency power amplifier of 2 x 710W, 2 x 630W of output power respectively. Despite their low power consumption, these amps are capable of very high volume output, yet still manage to remain surprisingly lightweight. Both models also come equipped with an onboard overload protection function to improve reliability and prolong component life and performance quality.
Robust But Extremely Portable Design
The EMX7 and EMX5 benefit from a robust and portable design with a rugged, impact-resistant, powder-coated metal chassis geared towards extended operation and road usage. Large handles on the front and back of the enclosure make it extremely portable, and also help to protect knobs and terminals on the surface of the chassis from impact or pressure during transport.
Easy Setup, Easy Operation
With their intuitive, user-friendly architecture, the EMX7 and EMX5 can be setup and operated quickly and easily by users with a fundamental understanding of sound reinforcement. Their versatile enclosure design allows users to choose from a variety of vertical or horizontal placements depending on the type of application. From a tabletop, floor, or installation environment no matter used on a tabletop or from a seated position with the mixer placed on the floor.
Speaker Processor and Preset (EMX7 only)
The speaker processor function allows you to select an appropriate setting to match the particular speakers you’re using. It features presets specifically tuned for each model in Yamaha’s extensive lineup of passive speakers, including CBR, Club, A and R series. This allows users to optimize speaker performance and save even more time during system setup. It also includes a bass boost function that can be enabled to significantly bring out the lower frequencies.
Bộ triệt dội âm tích hợp
Vài điều có thể làm hư một buổi biểu diễn hoặc phát biểu như những tiếng hú khó đột ngột và khó chịu . May mắn là EMX2 được trang bị tính năng Feedback Suppressor tận dụng công nghệ kỹ thuật số độc đáo của Yamaha để ngay lập tức loại bỏ thông tin phản hồi khó chịu với việc chuyển đổi duy nhất một nút.
3-band Equalizer Control
With individual knobs you can adjust the [HIGH], [MID], and [LOW] audio frequencies. You can operate instantly turning the control to amplify (boost) and attenuate (cut) the corresponding frequency band.
Flex 9 Graphic Equalizer (EMX7 only)
EMX7 is equipped with Flex-type graphic equalizer (Flex9GEQ) that allows you to select up to nine bands out of a total of 31 for fine tuning ±15 dB.
1-Knob Master EQ™ (EMX5 only)
Để có thể giúp ích cho việc tùy chỉnh âm thanh của ban, EMX2 1-knb Master touch cho phép bạn ứng dụng chế độ EQ chỉ với 1 nút vặn đơn giản. Chế độ SPEECH được sử dụng dành cho cách buổi meeting, hội thảo hoặc hội nghị bằng cách giảm bớt dải tần thấp giúp tiếng nói rõ ràng hơn. Chế độ MUSIC cung cấp một chế độ âm thanh cân bằng về âm học và biểu diễn ban nhạc; BASS BOOST thì lý tưởng cho những buổi biểu diễn DJ hoặc playback nhạc thiên về việc nhấn mạnh những âm thanh trầm.
EMX7/5 is equipped with the popular 1-knob COMP function used in MGP and MG series models. By simply operating a single control, it is possible to get optimal compression for vocals and instruments. As the [COMP] control is turned to the right, the threshold, ratio, and output gain are adjusted simultaneously.
EMX7/5 can be mounted onto a 19-inch rack by using the RK-EMX7 (rack-mount kit) sold separately.
Comprehensive, Professional Effects and Signal Processing
EMX7/5 are equipped with a powerful, comprehensive DSP section that provides a total of 24 different effects that are in the same league as our famed SPX effect processor series used by professionals. It is possible to add reverb and delay effects that simulate the sound of different performance environments, such as concert halls and small clubs.
Flexible Speaker Connectivity
EMX7/5 are equipped with speaker jacks which can be used with both TS phone and speakON plugs.
Bộ nguồn đa năng thông dụng
EMX7/5 have a highly-efficient internal universal power supply, then offer worry-free operation in any region around the globe - even in environments prone to potentially damaging power fluctuations. An internal power supply also simplifies rack mounting of the console for installed applications, eliminating the need for a bulky adapter or additional connections.
|I/O||Inputs||TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)||TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)|
|Phantom power||+48 V||+48 V|
|Outputs||SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]||SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]|
|Bus||Stereo: 1, AUX: 2 (Including FX)||Stereo: 1, AUX: 2 (Including FX)|
|Input Channel Function||PAD||30 dB (CH1-4)||30 dB (CH1-4)|
|Hi-Z||Supported (CH4)||Supported (CH4)|
|HPF||80 Hz, -12 dB/oct. (CH1–3)||80 Hz, -12 dB/oct. (CH1–3)|
|COMP||1-knob COMP (CH1–4)||1-knob COMP (CH1–4)|
|EQ HIGH||10 kHz +15 dB / -15 dB (Shelving)||10 kHz +15 dB / -15 dB (Shelving)|
|EQ MID||2.5 kHz +15 dB / -15 dB (Peaking)||2.5 kHz +15 dB / -15 dB (Peaking)|
|EQ LOW||100 Hz +15 dB / -15 dB (Shelving)||100 Hz +15 dB / -15 dB (Shelving)|
|On-board processors||DSP||SPX Algorithm 24 programs, Feedback suppressor, Graphic equalizer, Speaker processor||SPX Algorithm 24 programs, Feedback suppressor, Master EQ, Monitor EQ|
|I/O||Điều khiển và Khác||FOOT SWITCH : Effect Mute on/off||FOOT SWITCH : Effect Mute on/off|
|Ampli tích hợp||Công suất đầu ra tối đa @4ohms||1kHz THD+N less than 10% (CEA2006) : 710 W + 710 W, 1kHz THD+N less than 1% (CEA2006) : 600 W + 600 W||1kHz THD+N less than 10% (CEA2006) : 630 W + 630 W, 1kHz THD+N less than 1% (CEA2006) : 500 W + 500 W|
|Công suất đầu ra tối đa @8ohms||1kHz THD+N less than 10% (CEA2006) : 500 W + 500 W, 1kHz THD+N less than 1% (CEA2006) : 400 W + 400 W||1kHz THD+N less than 10% (CEA2006) : 460 W + 460 W, 1kHz THD+N less than 1% (CEA2006) : 370 W + 370 W|
|Level Meter||2 × 12 points LED meter (-30, -25, -20, -15, -10, -6, -3, 0, +3, +6, +10, PEAK)||2 × 7 points LED meter (-20, -10, -6, 0, +6, +10, PEAK)|
|Thông số kỹ thuật chung|
|Đáp tuyến tần số||Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz||Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz|
|Mạch bảo vệ||Bảo vệ tải||DC-fault||DC-fault|
|Bảo vệ Ampli||Over heat protection, Over current protection, Integral power protection||Over heat protection, Over current protection, Integral power protection|
|Bảo vệ nguồn điện||Over heat protection, Over current protection||Over heat protection, Over current protection|
|Total harmonic distortion||Input to SPEAKERS: MIC/LINE =LINE (CH1–4): 0.1% @ 10 W (40 Hz to 20 kHz), 0.04% @ 65 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: MIC/LINE =LINE (CH1–4): 0.02% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)||Input to SPEAKERS: 0.1% @ 10 W (40 Hz to 20 kHz), 0.05% @ 50 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: 0.03% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)|
|Hum & noise level||Equivalent input noise||-117 dBu (Noise is measured with A-weighting filter)||-117 dBu (Noise is measured with A-weighting filter)|
|Residual output noise||Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)||Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)|
|Crosstalk||-85 dB (1 kHz, Measured with 1 kHz band pass filter)||-85 dB (1 kHz, Measured with 1 kHz band pass filter)|
|Power requirements||AC 100-240V, 50Hz/60Hz||AC 100-240V, 50Hz/60Hz|
|General specifications||45 W (Idle) / 250 W (1/8 Power)||42 W (Idle) / 210 W (1/8 Power)|
|Dimensions||W||465 mm (18 5/16")||465 mm (18 5/16")|
|H||308 mm (12 1/8")||308 mm (12 1/8")|
|D||325 mm (12 13/16")||325 mm (12 13/16")|
|Net weight||9.5 kg (20.9 lbs)||9.5 kg (20.9 lbs)|
|Accessories||Owner’s Manual, Technical Specifications, AC power cord (2.5 m)||Owner’s Manual, Technical Specifications, AC power cord (2.5 m)|
|Options||Foot switch: FC5, Rack-mount brackets: RK-EMX7||Foot switch: FC5, Rack-mount brackets: RK-EMX7|
|Others||Operating Temperature : 0 to +40℃||Operating Temperature : 0 to +40℃|