YAMAHA AMPLIFIER PX10 - PX10

YAMAHA AMPLIFIER PX10

Mã sản phẩm: PX10

Giá: Vui lòng liên hệ

Nhà sản xuất: Yamaha

Tình trạng: Còn hàng

HÀNG CHÍNH HÃNG
BỎ VÀO GIỎ HÀNG

Powerful, Efficient Design

PX series models are driven by a newly developed Class-D amplifier engine that concentrates all the necessary functions into a single custom LSI chip, and uses PLL technology to control transfer characteristics in real time, achieving impressive sound quality and power. This new single-chip architecture offers higher output and improved performance in a more lightweight, yet reliable design. A combination of cutting-edge technology and an exhaustive component selection process make PX Series amplifiers supremely efficient amplifiers with low noise, reliable protection features, and above all, outstanding sound quality.

DSP for audio processing - Input Routing & Output Routing

Amp Mode allows the user to configure the system without difficulty by selecting the input routing and output routing. A total of 15 types of patterns can be selected. - Input routing (Dual/Parallel/Single/SUM)- Speaker System Structure (FULL+FULL/SUB+SUB/FULL+SUB/Bi-Amp/Boost Full/Boost Sub)

Versatile Lineup

With a lineup comprising four new models – 1,200 W x2 PX10, 1050 W x2 PX8, 800 W x2 PX5, and 500 W x2 PX3* – the PX series offers a versatile range of different power output capabilities suitable for a wide variety of sound reinforcement applications. The PX3 and PX5 also come equipped with a Power Boost Mode that combines the power output from two channels into one, achieving significantly higher single-channel power levels to drive high power handling speakers when needed (note that the number of channels available is halved in this case). *Power output figures rated at 4 Ω

Sophisticated Signal Processing

PX series models come with flexible onboard crossover, filters, delay, limiter and PEQ (fixed preset) functions as standard, allowing quick and easy system setup via the LCD display, without the need for any additional outboard gear. All models also feature Yamaha’s intelligent D-CONTOUR multi-band dynamic processing, allowing users to achieve consistent clarity and high-quality sound for either front-of-house or monitor configurations.

Easy, Intuitive Setup

To accommodate users with varying levels of sound reinforcement experience, the PX series offers both Basic and Advanced setup modes. Basic mode allows even inexperienced users to easily configure a system that meets their needs, while Advanced mode offers experienced users more precise control over every aspect of their sound. All models feature eight programmable presets for instant recall and reduced setup time that can be saved to a USB thumb drive and shared with other PX amplifiers.

Smart Configuration Wizard

The Config Wizard allows users to save even more time during system setup by assigning optimized speaker settings that match your system configuration– simply select the appropriate filter and crossover for each speaker, and Config Wizard will do the rest. Config Wizard also features presets* specifically tuned for each model in Yamaha’s extensive lineup of passive speakers, including the popular CBR, Club, Installation, and VXS/VXC series, and an advanced mode that allows more detailed configuration of parameters such as input routing, input sensitivity, amp gain, and speaker impedance. *Presets may be added and updated in the future.

Flexible Connectivity, Durable Construction

Equipped with both XLR and TRS inputs, and binding post, SpeakON and phone outputs, PX Series amplifiers offer the flexibility needed for a variety of setups and environments, and the durability to stand up to extended road-use thanks to the sturdy chassis and carrying handle design.

Utilities for Safe and Secure Operation

PX Series amplifiers make it fast and easy to configure panel settings, monitor amplifier status, and transfer data via USB, and also feature a panel locking function to keep your settings safe. Users can even export information such as internal device and log data to USB for rapid troubleshooting should difficulties arise.

 
 
 
PX10
 
PX3
 
PX5
 
PX8
100V models
Output power; 1kHz Non-clip 20msec Burst Both channels driven 1000W x 2 300W x 2 500W x 2 800W x 2
1200W x 2 500W x 2 800W x 2 1050W x 2
700W x 2 300W x 2 500W x 2 600W x 2
8Ω/Power Boost Mode - 600W x 1 800W x 1 -
4Ω/Power Boost Mode - 1000W x 1 1200W x 1 -
120V models
Output power; 1kHz Non-clip 20msec Burst Both channels driven 1000W x 2 300W x 2 500W x 2 800W x 2
1200W x 2 500W x 2 800W x 2 1050W x 2
700W x 2 300W x 2 500W x 2 600W x 2
8Ω/Power Boost Mode - 600W x 1 800W x 1 -
4Ω/Power Boost Mode - 1000W x 1 1400W x 1 -
220V-240V models
Output power; 1kHz Non-clip 20msec Burst Both channels driven 1000W x 2 300W x 2 500W x 2 800W x 2
1200W x 2 500W x 2 800W x 2 1050W x 2
700W x 2 300W x 2 500W x 2 600W x 2
8Ω/Power Boost Mode - 600W x 1 800W x 1 -
4Ω/Power Boost Mode - 1000W x 1 1400W x 1 -
General specifications
Sampling frequency rate Internal 48kHz 48kHz 48kHz 48kHz
A/D D/A Converters AD/DA: 24-bit linear, 128 times over sampling AD/DA: 24-bit linear, 128 times over sampling AD/DA: 24-bit linear, 128 times over sampling AD/DA: 24-bit linear, 128 times over sampling
Total harmonic distortion 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) 0.1% (1kHz, 10W), 0.3% (1kHz, Half power)
Frequency response ±1.0dB (1W, 8Ω, 20Hz to 20kHz) ±1.0dB (1W, 8Ω, 20Hz to 20kHz) ±1.0dB (1W, 8Ω, 20Hz to 20kHz) ±1.0dB (1W, 8Ω, 20Hz to 20kHz)
Crosstalk Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt) Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt) Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt) Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt)
Voltage Gain/Sensitivity 8Ω Volume max 32.0dB/+9.3dBu (Gain setting: 32dB), 26.0dB/+15.3dBu (Gain setting: 26dB), 37.3dB/+4dBu (Gain setting: +4dBu), 27.3dB/+14dBu (Gain setting: +14dBu) 32.0dB/+4.1dBu (Gain setting: 32dB), 26.0dB/+10.1dBu (Gain setting: 26dB), 32.1dB/+4dBu (Gain setting: +4dBu), 22.1dB/+14dBu (Gain setting: +14dBu) 32.0dB/+6.3dBu (Gain setting: 32dB), 26.0dB/+12.3dBu (Gain setting: 26dB), 34.3dB/+4dBu (Gain setting: +4dBu), 24.3dB/+14dBu (Gain setting: +14dBu) 32.0dB/+8.3dBu (Gain setting: 32dB), 26.0dB/+14.3dBu (Gain setting: 26dB), 36.3dB/+4dBu (Gain setting: +4dBu), 26.3dB/+14dBu (Gain setting: +14dBu)
8Ω Volume max /Power Boost mode - 35.0dB/+4.1dBu (Gain setting: 32dB), 29.0dB/+10.1dBu (Gain setting: 26dB), 35.1dB/+4dBu (Gain setting: +4dBu), 25.1dB/+14dBu (Gain setting: +14dBu) 34.0dB/+6.3dBu (Gain setting: 32dB), 28.0dB/+12.3dBu (Gain setting: 26dB), 36.3dB/+4dBu (Gain setting: +4dBu), 26.3dB/+14dBu (Gain setting: +14dBu) -
Input impedance 20kΩ (Balance), 10kΩ (Unbalance) 20kΩ (Balance), 10kΩ (Unbalance) 20kΩ (Balance), 10kΩ (Unbalance) 20kΩ (Balance), 10kΩ (Unbalance)
I/O Connectors Line Input XLR-3-31 x2, 1/4 "PHONE(TRS) x2 XLR-3-31 x2, 1/4 "PHONE(TRS) x2 XLR-3-31 x2, 1/4 "PHONE(TRS) x2 XLR-3-31 x2, 1/4 "PHONE(TRS) x2
Indicators POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature
Latency 1.5 msec (Analog Input to Speakers) 1.5 msec (Analog Input to Speakers) 1.5 msec (Analog Input to Speakers) 1.5 msec (Analog Input to Speakers)
Presets 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers)
Power requirements Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage.
General specifications 310W (1/8 MAX power, 4Ω, Pink noise at all channels), 60W (4Ω, Idling) 160W (1/8 MAX power, 4Ω, Pink noise at all channels), 55W (4Ω, Idling) 230W (1/8 MAX power, 4Ω, Pink noise at all channels), 55W (4Ω, Idling) 280W (1/8 MAX power, 4Ω, Pink noise at all channels), 60W (4Ω, Idling)
Dimensions W 480mm (18-7/8") 480mm (18-7/8") 480mm (18-7/8") 480mm (18-7/8")
H 88mm (3-7/16"): 2U 88mm (3-7/16"): 2U 88mm (3-7/16"): 2U 88mm (3-7/16"): 2U
D 388mm (15-2/8") 388mm (15-2/8") 388mm (15-2/8") 388mm (15-2/8")
Net weight 7.4 kg (16.31 lbs) 6.9 kg (15.21 lbs) 6.9 kg (15.21 lbs) 7.2 kg (15.87 lbs)
Accessories USB cover, Owner's Manual, Specification sheet, AC cable (2.0m) x 1 USB cover, Owner's Manual, Specification sheet, AC cable (2.0m) x 1 USB cover, Owner's Manual, Specification sheet, AC cable (2.0m) x 1 USB cover, Owner's Manual, Specification sheet, AC cable (2.0m) x 1
Others Operating Temperature: 0°C to +40°C, Storage temperature: -20°C to +60°C Operating Temperature: 0°C to +40°C, Storage temperature: -20°C to +60°C Operating Temperature: 0°C to +40°C, Storage temperature: -20°C to +60°C Operating Temperature: 0°C to +40°C, Storage temperature: -20°C to +60°C
Thông số kỹ thuật chung
Tỷ lệ S/N 101dB (A-weighted, 8Ω, Gain setting = +14dBu) 100dB (A-weighted, 8Ω, Gain setting = +14dBu) 100dB (A-weighted, 8Ω, Gain setting = +14dBu) 101dB (A-weighted, 8Ω, Gain setting = +14dBu)
Điện áp đầu vào tối đa +24dBu +24dBu +24dBu +24dBu
Đầu nối I/O Cổng ngõ ra loa Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2
Khác USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp
Các bộ xử lý Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay) Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay) Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay) Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay)
Mạch bảo vệ Bảo vệ tải POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically)
Bảo vệ Ampli Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically)
Bảo vệ nguồn điện Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown
Cấp Ampli Class D, Balanced output circuit (BTL) Class D, Balanced output circuit (BTL) Class D, Balanced output circuit (BTL) Class D, Balanced output circuit (BTL)
Tản nhiệt 16 step variable speed fan x 2, front to rear airflow 16 step variable speed fan x 2, front to rear airflow 16 step variable speed fan x 2, front to rear airflow 16 step variable speed fan x 2, front to rear airflow
Đăng ký thành viên để đánh giá sản phẩm
Giỏ hàng

Không có sản phẩm trong giỏ hàng.

Hỗ trợ trực tuyến