Processor YAMAHA REV500

Mã sản phẩm: REV500

Giá: Vui lòng liên hệ

Nhà sản xuất: YAMAHA

Tình trạng: Còn hàng

Số lượng:

HÀNG CHÍNH HÃNG

BỎ VÀO GIỎ HÀNG

Mô tả
Thông số kỹ thuật
Nhận xét

Features

Affordable

Yamaha's design team has worked hard to make REV500 sound great but remain affordable.

Easy to Use

A large custom LCD display and dedicated rotary controls for the four most critical reverb parameters make REV500 extremely easy to use.

Superb Sound Quality

REV500 features 20-bit AD/DA oversampling converters and the same DSP as that of the PROR3 for superb sonic performance.

True Stereo Processing

Unlike some pseudo stereo reverberators, REV500 is a true stereo reverb processor, with independent left and right channels.

Organized Program Libraries

Reverb programs are categorized into group for selection ease. The 100 preset programs and 100 user programs are divided into four categories: Hall, Room, Plate and Special.

Quick Audition

REV500 has snare and rim shot samples built-in, so programs and edits can be auditioned directly from the front panel (AUDITION button).

Professional Connectors

Balanced XLR and phone jack connections allow simple hookup to professional or semiprofessional gear. Input and output levels for each channel are independently switchable between -10dB and +4dB.

Input Level Monitor

A dual level control and two four-segment LED level meters simplify level setting for optimal performance.

MIDI

REV500 supports real-time parameter control via MIDI Control Changes and program selection via MIDI Program Changes. MIDI Bulk Dump is used for user program backup.

Foot Switch

An optional footswitch can be used to mute the reverb effect or select reverb programs. Selection order is determined by the MIDI Program Change Map.

Specs

Specifications

Audio		Frequency Response: 20Hz - 20kHz (+1, -2dB); Dynamic Range: 96dB typical, greater than 90dB; Noise Level: Less than -72dB (IHF-A Filter); THD: Less than 0.03% (1kHz @max. level, CD 20kHz LPF filter)
AD/DA Conversion		AD: 20-bit, 64-times oversampling; DA: 20-bit 8-times oversampling; Sampling Rate: 44.1 kHz
MIDI Control		Program Change, Control Change, Parameter Change, Bulk Dump
Memories		Preset: HALL 1-25, ROOM 1-25, PLATE 1-25, SPECIAL 1-25; User: HALL 1-25, ROOM 1-25, PLATE 1-25, SPECIAL 1-25
Inputs		Connector: XLR-3-31 type x 2, phone jack x 2; Nominal Level: +4/-10dB switchable; Impedance: 20 kOhms
Outputs		Connector: XLR-3-32 type x 2, phone jack x 2; Nominal Level: +4/-10 dB switchable; Impedance: 150 Ohms
Front Panel		Controls: INPUT LEVEL, PRE DELAY, REV TIME, HI-RATIO, ER LEVEL; Buttons: TYPE, PRESET/USER, -, +, STORE, AUDITION, EFF LEVEL, UTILITY; LCD: Custom LCD; LED: Two four-segment level meters, UTILITY, EFF LEVEL; Switches: POWER
Rear Panel		Connectors: INPUT L/R (XLR x 2, phone jack x 2), OUTPUT L/R (XLR x 2, phonejack x 2), FOOT SWITCH (phone jack), MIDI IN, MIDI OUT,(5-pin DIN x 2); Switches: INPUT LEVEL (+4/-10 Db), OUTPUT LEVEL (+4/-10 Db)
Power Requirements		120 V, 60 Hz, 15 W
Dimensions (W x D x H)		480 x 227.9 x 45 mm (18.9" x 9" x 1.8")
Weight		3.5 kg (7.7 lb.)